Hirzt F9L NC Point to Point Borer
Click on image to view gallery
Hirzt are a leading Italian manufacture of Point to Point Boring Systems and Edge Banders.
The Hirzt F Series of Numerically Controlled Point to Point through feed boring machines are designed to offer maximum flexibility while needing only a few seconds to set up. The machining units are positioned beneath the work piece ensuring waste material is easily removed.
This feeding system allows any length of panel to processed, while maintaining a compact machine foot print of approximately 3m2.
Whether you are working with a single piece of material or looking to process hundreds, the F Series is quick to set up with the operator required to adjust a single sliding pressure fence. The operator then starts the cycle and a pneumatic panel clamp feeds the panel along the X axis, the boring head moves along the Y axis and the Z axis controls the boring depth.
|Number of Vertical Spindles||8|
|Number of Horizontal Spindles||1 + 1 (fonrt & back boring), 1 (side boring)|
|Maximum Panel Width||950 mm|
|Maximum Boring Width||800 mm|
|Maximum Grooving/ Sawing Range||600 mm|
|Panel Feeding Speed||30 m/min|
|Spindle Rotation Speed||3400 rpm|
|Air Pressure Requirments||6 bar|
|Working Table Height||900 mm|
|Overall Dimensions||1650 x 2100 mm|